PRODUCTS
Checkout Items:,Value:
Left tabMURRAY CLAMPSRight tab

BACK TO PRODUCTS | EXHAUSTS & PERFORMANCE | ITG AIR FILTERS | MURRAY CLAMPS
MURRAY CONSTANT TENSION HOSE CLAMPSProduct info/pictures
Left tabMURRAY CONSTANT TENSION HOSE CLAMPS
Right tab

This constant tension design of clip is recommended for use with silicone hoses when fitted to turbocharger compressor outlets and intercooler pipe work. It's unique design compensates for the effects of thermal cycling and compression set of the hose.

Used by WRC rally teams worldwide, it's fitment will reduce the risk of hoses coming loose and blowing off, which in the case of turbocharged cars, could prevent overspeeding of the turbocharger and inevitable failure.

The unique dual bead concentrates band sealing pressure, increasing it's performance when compared with the standard smooth clamps. The rolled edge design prevents the edges of the clamp from cutting into the hose.

Material: Stainless steel, heat treated Rc 40-46
Fitting torque: Max 75inc lbs (8.47 Nm) Min 50ins lbs (5.65 Nm)
Operating Temp: Max 250° Celcius


Murray Clamp Tension Hose Clamps
Murray Clamp Tension Hose Clamp
BACK TO PRODUCTS | EXHAUSTS & PERFORMANCE | ITG AIR FILTERS | MURRAY CLAMPS

© 2012 Extreme 4x4 Ltd Contact Us | Terms & Conditions | Site Map Call us now on tel: +44 (0)1255 411411