Thermometric provides 9500 pounds of pulling capacity. Its alloy housing is sealed at key points for superior water/environmental resistance and provides a shield for the motor wiring. High gloss, chip resistant powder coat finish over chromate coating provides excellent corrosion resistance. Adding to the new winch design is a new indexed connector for the hand-held remote control and an easy-to-use clutch lever.
Internally, the 9.5ti Thermometric winch features the WARN exclusive multi-segment CAM actuated brake, a new Gen II Bosch motor and a rugged 3-stage planetary gear train reduction system. A premier WARN feature is the new motor-mounted thermal sensor which relays instantaneous temperature information to the hand-held winch remote to provide operator feedback while the winch is in operation.
SPECIFICATIONS: | | Rated line pull | 9500 lbs. (4310kgs) single-line | | Motor | Gen II, Series Wound™ | | Remote Control | Remote switch, 12' (3.7m) lead | | Geartrain | 3-Stage Planetary | | Gear ratio | 156:1 | | Lubrication | Aeroshell #17 | | Clutch (freespooling) | Sliding Ring Gear | | Brake | Automatic Direct Drive Cone | | Drum diameter/Length | 2.5" / 9.0" (6.4cm/23cm) | | Weight | 89 lbs. (40.4 kgs) | | Wire rope | 125', 5/16" diameter (38m, 8mm diam.) | | Fairlead | Roller | | Recommended Battery | 650 CCA minimum for winching | | Battery leads | 2 gauge, 72" (1.83m) | | Finish | Chromate with High-gloss Powder Coat | | Nuts / bolts | PN 39570 |
12V DC PERFORMANCE SPECS: Line Pull Lbs (Kgs) | Line Speed Ft/min (M/min) | Motor Current | Pull by layer: layer/Lbs (Kgs) | | 0 | 62 (18.9) | 47 amps | 1/9500 (4313) | | 2000 (910) | 16.3 (4.97) | 160 amps | 2/8650 (3927) | | 4000 (1810) | 11.8 (3.60) | 230 amps | 3/7920 (3595) | | 6000 (2720) | 9.31 (2.84) | 305 amps | 4/7400 (3359) | | 8000 (3630) | 7.59 (2.31) | 370 amps | 5/6940 (3150) | | 9500 (4310) | 6.67 (2.03) | 425 amps | | Above performance specs are based on first layer of drum. |
Need extra cabling for the installation? Click here to view.
Buy a winch or winch bumper and get 20% off specialist winch training with Oakwoods. More info here.
|
